YSC 8K · File Schedule

Issue files.

Everything you need to run the box: the control panel and the three guides. Firmware is flashed right inside the driver — no separate .bin download needed. New here? Start with the driver, then follow Setup.

01 SOFTWARE
F—01 YSC 8K DriverControl panel · serial link · monitor · macros · jitter · curves · gamepad mapping · on-board storage · built-in firmware update v1.17.0 · WIN 10/11
89.6 MB · 2026-10-19
ZIP ARCHIVE Download .zip
BEFORE YOU INSTALL Some antivirus tools flag hardware-control installers by heuristics — a known false-positive pattern for this device class. Every release ships with a SHA-256 checksum on this page; verify the hash before running, and only download from this site.
02 DOCUMENTATION
F—02 Usage & Protocol ReferenceBox usage · full YSC command set 30–44 · 50 · 132 · 133 · complete MAKCU km.* dialect PDF · 15 PP · EN
V1 CHECKED Read .pdf
F—03 Firmware Upgrade GuideStep-by-step · data-cable check · port selection · lamp states · FAQ & recovery PDF · 7 PP · ZH
INCL. TROUBLESHOOTING Read .pdf
F—04 Gamepad Mapping GuideButton rules · trigger thresholds · motion-to-stick scaling · export / import PDF · 7 PP · ZH
PS5 / XBOX / XINPUT / HID Read .pdf
03 RELEASE NOTES

YSC v1.17.0 — 2026-10-19

NEW FEATURES

Physical Guard

HUMAN-SPEED LIMIT

1. Learns your fastest reversal — the box measures your own real left/right and up/down reversal speed and blocks software-driven jitter that no human hand can produce.
2. Physical stays passthrough — only software move commands are filtered (cmd 30/31, Makcu move, kmboxnet, SDK); buttons, wheel, keyboard, macros, jitter macro and mouse curve are untouched.
3. Per-axis windows — separate X / Y values (default 12 ms): larger = harder for software to reverse, smaller = closer to native feel. Off by default.

3 GUARD RULES
HOW TO USE

Calibration

5 SEC · GO FAST

1. Open Physical Guard and press Start X (or Start Y) Calibration — a 3-second countdown begins.
2. Swing the mouse left/right (or up/down) as fast as you can for 5 seconds — 5 cm or 10 cm of hand travel is enough, don’t control the amplitude.
3. Save the values to the device: they persist and survive a reboot, and an uncalibrated axis reuses the other axis value.

3 STEPS
FIXES

Stability

CONFIG IMPORT

1. Config import — fixed a data mismatch that could appear when importing saved profiles.

1 FIX
INSTALLATION NOTES The package already includes the latest driver.
Calibration needs HID upload on, the mouse on the mouse line and physical X/Y unmasked — don’t press buttons or run macros while calibrating.
Run this package directly over v1.15.1 to upgrade in place — your configuration is preserved.
SHA-256 (YSC_8K_Setup_1.17.0.zip): f4ba436cfaedc78aeece2479db340ff0eb0ffe492ae03bf4c3c519f801a009bb